top of page

JENAWAVE.COM Group

Public·15 members
Demian Suvorov
Demian Suvorov

Red Alert 2 Random Serial Number Class 2000


I don't think the game actually requires a valid serial there; only the original CD installer checks that, not the game. But for network play, it does need a unique one there. So basically modify it to anything random you want, and as long as it's not the same on both PCs it should solve the issue.




Red Alert 2 Random Serial Number Class 2000



In all of the previous examples of subnetting, notice that the same subnet mask was applied for all the subnets. This means that each subnet has the same number of available host addresses. You can need this in some cases, but, in most cases when there is the same subnet mask for all subnets, it wastes address space. For example, in the Sample Exercise 2 section, a class C network was split into eight equal-size subnets; however, each subnet did not utilize all available host addresses, which results in wasted address space. Figure 4 illustrates this wasted address space.


CIDR moves away from the traditional IP classes (Class A, Class B, Class C, and so on). In CIDR , an IP network is represented by a prefix, which is an IP address and some indication of the length of the mask. Length means the number of left-most contiguous mask bits that are set to one. So, network 172.16.0.0 255.255.0.0 can be represented as 172.16.0.0/16. CIDR also depicts a more hierarchical Internet architecture, where each domain takes its IP addresses from a higher level. This allows for the summarization of the domains to be done at the higher level. For example, if an ISP owns network 172.16.0.0/16, then the ISP can offer 172.16.1.0/24, 172.16.2.0/24, and so on to customers. Yet, when advertising to other providers, the ISP only needs to advertise 172.16.0.0/16.


The following example enables WRED on the serial interface 1 and configures flow-based WRED. The random-detect interface configuration command is used to enable WRED. Once WRED is enabled, the random-detect flow command is used to enable flow-based WRED.


After flow-based WRED is enabled, the random-detect flow average-depth-factor command is used to set the scaling factor to 8 and the random-detect flow count command is used to set the flow count to 16. The scaling factor is used to scale the number of buffers available per flow and to determine the number of packets allowed in the output queue for each active flow.


C. It shall be unlawful for any person to remove, alter, deface, destroy, conceal, or otherwise obscure the manufacturer's serial number or marks, including personalty marked with a social security number preceded by the letters "VA," from such personal property or any part thereof, without the consent of the owner, with intent to render it or other property unidentifiable.


D. It shall be unlawful for any person to possess such personal property or any part thereof, without the consent of the owner, knowing that the manufacturer's serial number or any other distinguishing identification number or mark, including personalty marked with a social security number preceded by the letters "VA," has been removed, altered, defaced, destroyed, concealed, or otherwise obscured with the intent to violate the provisions of this section.


"Equipment or materials used to manufacture an unlawful electronic communication device" means (i) a scanner capable of intercepting the electronic serial number or mobile identification number of a cellular or other wireless telephone; (ii) electronic software or hardware capable of altering or changing the factory-installed electronic serial number of a cellular or other wireless telephone or a computer containing such software; (iii) a list of cellular or other wireless telephone electronic serial numbers with their associated mobile identification numbers; or (iv) a part, accessory or component of an unlawful electronic communications device possessed or used in the manufacture of such device including any electronic serial number, computer software, mobile identification number, service access card, account number, or personal identification number used to acquire, receive, use, decrypt or transmit an electronic communication service without the actual consent or knowledge of the electronic communication service provider.


Any person, firm, association or corporation who or which intentionally removes, defaces, alters, changes, destroys or obliterates in any manner or way or who causes to be removed, defaced, altered, changed, destroyed or obliterated in any manner or way any trademark, distinguishment or identification number, serial number or mark on or from any article or device, in order to secrete its identification with intent to defraud, shall be guilty of a Class 1 misdemeanor.


It shall be unlawful for any person, firm, association, or corporation regularly engaged in the business of repairing, selling, renting or leasing of business machines to fail to report any business machine which such person, firm, association, or corporation knows has an altered or removed identification or serial number. The report shall be made to the appropriate law-enforcement agency for the county, city, or town where such business machine is located.


No person, firm, association or corporation, either individually or in association with one or more other persons, firms, associations or corporations shall remove, change or alter the serial number or other identification number stamped upon, cut into or attached as a permanent part of any household or electrical or electronic appliance where such number was stamped upon, cut into or attached to such appliance by the manufacturer thereof.


No person, firm, association or corporation shall knowingly have in his or its possession for the purpose of resale or keep in his possession for a period in excess of forty-eight hours without reporting such possession to the appropriate law-enforcement agency in his county, town or city a household or electrical or electronic appliance, with knowledge that the serial number or other identification number has been removed, changed or altered.


Every manufacturer or dealer shall keep a register of all machine guns manufactured or handled by him. This register shall show the model and serial number, date of manufacture, sale, loan, gift, delivery or receipt of every machine gun, the name, address, and occupation of the person to whom the machine gun was sold, loaned, given or delivered, or from whom it was received. Upon demand every manufacturer or dealer shall permit any marshal, sheriff or police officer to inspect his entire stock of machine guns, parts, and supplies therefor, and shall produce the register, herein required, for inspection. A violation of any provisions of this section shall be punishable as a Class 3 misdemeanor.


Every machine gun in this Commonwealth shall be registered with the Department of State Police within twenty-four hours after its acquisition or, in the case of semi-automatic weapons which are converted, modified or otherwise altered to become machine guns, within twenty-four hours of the conversion, modification or alteration. Blanks for registration shall be prepared by the Superintendent of State Police, and furnished upon application. To comply with this section the application as filed shall be notarized and shall show the model and serial number of the gun, the name, address and occupation of the person in possession, and from whom and the purpose for which, the gun was acquired or altered. The Superintendent of State Police shall upon registration required in this section forthwith furnish the registrant with a certificate of registration, which shall be valid as long as the registrant remains the same. Certificates of registration shall be retained by the registrant and produced by him upon demand by any peace officer. Failure to keep or produce such certificate for inspection shall be a Class 3 misdemeanor, and any peace officer, may without warrant, seize the machine gun and apply for its confiscation as provided in 18.2-296. Upon transferring a registered machine gun, the transferor shall forthwith notify the Superintendent in writing, setting forth the date of transfer and name and address of the transferee. Failure to give the required notification shall constitute a Class 3 misdemeanor. Registration data shall not be subject to inspection by the public.


Every manufacturer or dealer shall keep a register of all "sawed-off" shotguns and "sawed-off" rifles manufactured or handled by him. This register shall show the model and serial number, date of manufacture, sale, loan, gift, delivery or receipt of every "sawed-off" shotgun and "sawed-off" rifle, the name, address, and occupation of the person to whom the "sawed-off" shotgun or "sawed-off" rifle was sold, loaned, given or delivered, or from whom it was received. Upon demand every manufacturer or dealer shall permit any marshal, sheriff or police officer to inspect his entire stock of "sawed-off" shotguns and "sawed-off" rifles, and "sawed-off" shotgun or "sawed-off" rifle barrels, and shall produce the register, herein required, for inspection. A violation of any provision of this section shall be punishable as a Class 3 misdemeanor.


E. A law-enforcement agency that takes into custody a firearm surrendered to such agency pursuant to subsection C by a person who is subject to a protective order pursuant to 16.1-279.1 or 19.2-152.10 shall prepare a written receipt containing the name of the person who surrendered the firearm and the manufacturer, model, and serial number of the firearm and provide a copy to such person. Any firearm surrendered to and held by a law-enforcement agency pursuant to subsection C shall be returned by such agency to the person who surrendered the firearm upon the expiration or dissolution of the protective order entered pursuant to 16.1-279.1 or 19.2-152.10. Such agency shall return the firearm within five days of receiving a written request for the return of the firearm by the person who surrendered the firearm and a copy of the receipt provided to such person by the agency. Prior to returning the firearm to such person, the law-enforcement agency holding the firearm shall confirm that such person is no longer subject to a protective order issued pursuant to 16.1-279.1 or 19.2-152.10 and is not otherwise prohibited by law from possessing a firearm. A firearm surrendered to a law-enforcement agency pursuant to subsection C may be disposed of in accordance with the provisions of 15.2-1721 if (i) the person from whom the firearm was seized provides written authorization for such disposal to the agency or (ii) the firearm remains in the possession of the agency more than 120 days after such person is no longer subject to a protective order issued pursuant to 16.1-279.1 or 19.2-152.10 and such person has not submitted a request in writing for the return of the firearm.


About

Welcome to the group! You can connect with other members, ge...

Members

bottom of page